Info:
Manufacturer/Model:
Manufactured
by Wingun, WC401
Replica Of:
Styled after the Springfield Armory PX9115L Lightweight Champion
Operator (.45 ACP) and similar models
Made In: Taiwan
Caliber/Ammunition/Feed:
177, BB,
15-shot internal magazine
Air Source:
CO2,
12 g Powerlet
Accessories: None
Recommended Pellet or BB:
Daisy Avanti BBs
Weight (lb)/Length (in):
0.81, 7.2
Body Material/Finish/Grips:
plastic, black,
plastic
Barrel Length (in)/Material/Rifled:
3.5, steel, no
Trigger Action:
DA
Trigger Pull (lbs)/Adjustable:
9.9, no
Sights (front/rear):
fixed, fixed
Velocity (fps):
not specified by manufacturer
Sound Level (dB): 96
Thickness of Pellet Holder (in): N/A
Manufactured Dates:
2005 - present
Condition/Manual/Box:
98%, yes, yes
Serial Number: None
|
Comments:
This is a small,
lightweight, all plastic BB gun with an internal 15-shot
magazine made in Taiwan by Wingun and imported by Palco Sports. It is a nearly
perfect clone of the Daisy 15XT, which is made in Japan. It even
has the words "Model 15XT" molded into the left side of the
slide. Interestingly, the Taiwan clone costs more than the Daisy
it copies even though the finish and action are not quite as
smooth. Crosman Copperhead BBs do not work well in this gun
(jamming). Daisy Avanti BBs give acceptable performance,
although not on par with the Daisy 15XT. Accessory rails on the
top and bottom can be used to mount lasers and red-dot sights.

Daisy 15XT
Performance:
Measurements were made on
2/17/07 at a temperature of 59 ºF and 14' elevation. A ten shot
string was fired from a bench rest at 15' using Daisy Avanti BBs
(5.5 gr). The highest velocity measured was 392 fps, the lowest
was 365 fps (average of the 10-shot string was 381 fps). A six
shot string fired with open sights grouped at 1.26". Click the
thumbnail below to see a larger image.
Click here for a description of the measurement methods.

|