S&W M&P (Umarex)

Smith & Wesson Military & Police (40 cal)

Made in Taiwan by Wingun for Umarex, S&W M&P
Replica Of:
Smith & Wesson Military & Police (40 cal)
Made In:
Taiwan by Wingun

177, steel BBs, 19-shot magazine
Air Source:
CO2, 12 g Powerlet
Recommended Pellet or BB:
Daisy Avanti BBs
Weight (lb)/Length (in):
1.0, 7.6
Body Material/Finish/Grips:
plastic, black, plastic
Barrel Length (in)/Material/Rifled:
4.5, steel, no
Trigger Action:
DA (only)
Trigger Pull (lbs)/Adjustable:
5.5 (DA)
Sights (front/rear):
fixed, fixed
Velocity (fps):
Sound Level (dB): 100
Thickness of Pellet Holder (in): N/A
Manufactured Dates:
2008 - present
98%, yes, yes (backer card)
Serial Number:
Comments: The S&W M&P is another in a series of CO2-powered replicas made in Taiwan by Wingun and distributed world-wide by Umarex. The trademarks on this gun are officially licensed from Smith & Wesson. This all plastic replica is a faithful reproduction of the details from the firearm. However, the only functional parts are the trigger and magazine release. All of the other controls are molded into the plastic frame. The slide does not move. The trigger pull is very long and smooth, but has no distinct break point. The high-powered S&W M&P has excellent accuracy for a BB gun with a short, non-rifled barrel. For less than $40, the S&W M&P is an excellent value for a CO2-powered air pistol.

Pyramyd Air Report (Part 1) on the S&W M&P
Pyramyd Air Report (Part 2) on the S&W M&P

Performance: Measurements were made on 5/11/08 at a temperature of 75 F and 14' elevation. A ten shot string was fired from a bench rest at 15' using Daisy Avanti BBs (5.5 gr). The highest velocity measured was 449 fps, the lowest was 436 fps (average of the 10-shot string was 444 fps, s = 4). A six shot string shot with open sights using Daisy Avanti BBs grouped at 0.65". Click the thumbnail below to see a larger image. Click here for a description of the measurement methods.


Right Profile:
Front View: The magazine release is located on the left just behind the trigger guard. The rear sight uses a fiber optic insert. The front sight has a painted white dot.


Right Side Markings 1:

Right Side Markings 2:

Left Side Markings:

Loading BBs: The 19-shot magazine slides into the grip.

Loading CO2: The grip panel slides back to gain access to the CO2 loading chamber. The screw that tightens the CO2 cylinder has its handle completely hidden when the grip panel is closed.




 Copyright 2011