Walther CPSport /w laser (Umarex)

Walther P99 (9 mm)

Umarex, Walther CPSport
Replica Of:
Walther P99
Made In:
177, lead pellet, 8-shot cylinder
Air Source:
CO2, 12 g Powerlet
laser sight
Recommended Pellet or BB:
RWS Meisterkugeln Pistol/Rifle (7.8 gr)
Weight (lb)/Length (in):
1.3, 7.0
Body Material/Finish/Grips:
plastic, black, plastic
Barrel Length (in)/Material/Rifled:
3.3, steel, yes
Trigger Action:
Trigger Pull (lbs)/Adjustable:
9.8 (SA), no
Sights (front/rear):
fixed, adjustable (windage)
Velocity (fps):
Sound Level: 100
Thickness of Pellet Holder (in): 0.275
Manufactured Dates:
2001 - present
95%, yes, yes
Serial Number:
Comments: This is a faithful replica from Umarex of the Walther P99 right down to the interchangeable backstrap. It uses the 8-shot rotary magazine common to Umarex designs and a well-designed CO2 cartridge system that are identical to those on the Walther CP99. With practice, this gun is very accurate considering its short barrel. This guns fires in double action mode only with a two-stage trigger that has a very long first stage. This gun is distinguished from the CP99 by being double-action only and having a plastic slide. The front rail accommodates standard Picatinny accessories. The CPSport is available with and without the laser and comes in a variety of colors.

Performance: Measurements were made on 8/08/06 at a temperature of 84 F and 14' elevation. A ten shot string was fired from a bench rest at 15' using RWS Meisterkugeln Pistol/Rifle pellets (7.8 gr). The highest velocity measured was 375 fps, the lowest was 330 fps (average of the 10-shot string was 349 fps). A six shot string fired with a laser sight grouped at 0.66". Click the thumbnail below to see a larger image. Click here for a description of the measurement methods.

Test Firing Record:
April 15, 2007 - Tested with JSB Match Diabolo pellets.

Right Profile:

Front View:

Right Side Markings:

Left Side Markings:

Loading Pellets:

Loading CO2: The CO2 cartridge loading system allows the CO2 cylinder to be removed and reinserted without losing pressure. It is a very quick way to change CO2 bulbs.




 Copyright 2011